HI-1331B PH ELECTRODE IDEAL FOR LONG NECK FLASKS
HI-1331B
The Hanna HI-1331B is a glass bodied combination pH electrode with an extra long reach body specifically for measuring pH samples in long neck flasks.
The HI-1331B is a glass bodied combination pH electrode with an extra-long reach body (210mm) specifically for measuring pH samples in long neck flasks.
Supplied fitted with
- BNC connector - BNC is one of the most commonly used connector types in pH meters and electrodes. Compatible with any meter or electrode that uses BNC connectors.
- 1m cable
Tips for the most accurate measurements
Keep electrode hydrated
Ideally, pH electrodes should be kept in a storage solution when not in use. Placing the electrode in a small glass filled with storage solution is suitable. An option for pocket meters is to place a small piece of sponge into the meter’s cap and pour storage solution (HI-70300) into the cap to wet the sponge. Alternatively, purchase HI-740200 specialised electrode caps for storage. Pouring off any excess solution beforehand, the cap can then be placed on the meter.
Clean electrodes before use
Clean the junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy. Immerse the electrode in the proper cleaning solution for at least 15 to 20 minutes. Hanna offers a wide range of cleaning solutions for general purpose and specific applications.
Replace electrode once a year
If your electrode takes too long to stabilise a reading, or readings fluctuate wildly, it is most likely time to replace the electrode. The typical life span of any pH electrode is from 6 months to 1.5 years.
Read More
Reference | Single, Ag/AgCl | |
Junction | Ceramic, single | |
Connector | Screw Cap | |
Electrolyte | KCl 3.5M + AgCl | |
Max Pressure | 0.1 bar | |
Range | 0 to 13 pH; 0 to 70°C | |
Tip Shape | Spheric (dia: 7.5 mm) | |
Temperature Sensor | No | |
Amplifier | No | |
Body Material | Glass | |
Recommended Use | Specific for flasks |