HI-7010-023 GROLINE PH 10.01 CALIBRATION BUFFER, 230 ML

HI-7010-023 is a 230 mL bottle of high quality pH 10.01 calibration buffer that is NIST traceable and supplied with a Certificate of Analysis.

The pH 10.01 buffer in a 230ml bottle is designed specifically to accompany the GroLine series of meters and solutions. Ideal for those requiring an accurate alkaline reading, particularly suitable for those working in water purification plants, Hydroponics, and in any environments where the pH is expected to be alkaline. Hanna Microprocessor pH meters can be calibrated at pH9.18 and pH10.01.

Buffer solutions should be stored at 25 C, away from direct sunlight for accurate readings.

To correctly maintain your meter/electrode, we highly recommend use of a Hanna cleaning solution, as well as a buffer, for maximum performance every time. pH4, along with pH7, can also be used as an emergency storage solution.

Hanna buffer solutions are prepared, ready-to-use, according to precise formulas and standardised in accordance with the National Institute of Standards and Technology (NIST) to ensure quality and accuracy. All solutions show a batch number, an expiry date, and the correlation table between pH and temperature. A certificate of analysis is available on request. All bottled solutions are sealed with an air tight, tamper-proof seal to prevent any Carbon Dioxide from entering and causing a change in the pH buffer value.

Browse the Hanna complete range of solutions

• pH buffer solutions
• Standard solutions for conductivity, Total Dissolved Solids (TDS), turbidity, salinity and Ion-Selective Electrode (ISE) calibration
• Oxidation Reduction Potential (ORP) test and pre-treatment solutions
• Reference fill solutions for refillable electrodes
• General and specific cleaning solutions for electrodes
• Solutions for electrode maintenance and storage
• Solutions for sample preparation

Solutions are available in many sizes ranging from 20ml sachets for small users to 3.78L (1 gallon) containers for large quantity usage in laboratories.

For safety and traceability, all Hanna solutions are provided with a label showing the batch number and expiry date. A certificate of analysis is available on request in line with NIST standards.

Remember:

• Calibration only counts when using fresh solutions and properly cleaned electrodes every time.
• Routine maintenance will ensure accurate readings while extending the life of the electrode.

All calibration buffers are made to a premium quality, produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionised water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.