HI-1330B GLASS BODY REFILLABLE PH SEMI-MICRO ELECTRODE
In Stock 1 Produkt Tillgänglig
HI-1330B
The Hanna HI-1330B is a glass bodied single junction pH electrode with a semi-micro diameter for taking pH measurements in vials and test tubes.
The HI-1330B is a combination pH electrode specifically for use in vials and test tubes.
The electrode has a 1m cable and BNC connector.
Tips for the most accurate measurements
Keep electrode hydrated
Ideally, pH electrodes should be kept in a storage solution when not in use. Placing the electrode in a small glass filled with storage solution is suitable. An option for pocket meters is to place a small piece of sponge into the meter’s cap and pour storage solution (HI-70300) into the cap to wet the sponge. Alternatively, purchase HI-740200 specialised electrode caps for storage. Pouring off any excess solution beforehand, the cap can then be placed on the meter.
Clean electrodes before use
Clean the junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy. Immerse the electrode in the proper cleaning solution for at least 15 to 20 minutes. Hanna offers a wide range of cleaning solutions for general purpose and specific applications.
Replace electrode once a year
If your electrode takes too long to stabilise a reading, or readings fluctuate wildly, it is most likely time to replace the electrode. The typical life span of any pH electrode is from 6 months to 1.5 years.
Läs mer
| Reference | Single, Ag/AgCl | |
| Junction | Ceramic, single | |
| Connector | BNC | |
| Electrolyte | KCl 3.5M + AgCl | |
| Max Pressure | 0.1 bar | |
| Range | 0 to 12 pH; -5 to 70°C | |
| Tip Shape | Spheric (dia: 7.5 mm) | |
| Temperature Sensor | No | |
| Amplifier | No | |
| Body Material | Glass | |
| Recommended Use | Specific for flasks |
Liknande produkter
