HI-935008 T-TYPE THERMOCOUPLE THERMOMETER WITH FIXED PROBE
In Stock 38 Items available
HI-935008
Designed with user functionality and performance in mind, the HI-935008 is a waterproof T-type thermocouple thermometer that measures temperature from -50.0 to 300°C (-58.0 to 572°F). The included batteries provide up to 3500 hours of continuous use.
HI-935008 T-type Thermocouple Thermometer
This meter can be certified as traceable to NIST standards upon request.
- ±0.5 °C/ ±0.9 °F system accuracy
- Enable automatic shut off after 8 minutes, 60 minutes, or disabled
- Perfect for use in coffee and chocolate production, deep-frozen food, and instances when moisture is present.
CAL Check™ Feature
The HI-935008 includes Hanna‘s exclusive CAL Check™ technology. CAL Check™ allows the user to check calibration status. If the meter is calibrated, the display will automatically show "0.0°C" during startup.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Automatic Shut-off
The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Built to be Durable
Waterproof casing and optional shockproof rubber boot offers maximum protection for a durable thermometer than can handle any environment.
Portable Design
Made to fit comfortably in your hand for on-the-go testing, the large LCD display provides at-a-glance readings from any angle.
Single Button Operation
With single button operation, temperature measurements could not more simple. This single button turns the meter on and off and allows you to cycle through options when in Setup Mode.
Supplied with Fixed Probe
The HI-935008 is supplied with a fixed rugged penetration probe designed for general use. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in the food sector.
NIST Traceable Calibration Service
This meter can be provided with a calibration certificate traceable to the National Institute of Standards and Technology (NIST) upon request. Traceability to NIST makes it possible to achieve the highest levels of measurement quality and productivity.
Shockproof rubber boot (buy separately)
Optional HI-710026 blue Shockproof rubber boot offers maximum impact protection.
Read More
Thermometer: | ||
T-Type Thermocouple Temperature Range | -50.0 to 199.9 °C ; 200 to 300°C -58.0 to 399.9 °F ; 400 to 572°F | |
T-Type Thermocouple Temperature Resolution | 0.1°C (up to 199.9°C) / 1°C (outside) 0.1°F (up to 399.9 °F) / 1°F (outside) | |
T-Type Thermocouple Temperature Accuracy | ±0.5°C (-50.0 to 300°C) | |
Thermometer Probe | Fixed T-type thermocouple probe w/1 m (3.3’) white cable & white handle |
General meter: | ||
Automatic Shut-Off | User selectable: 8 min, 60 min or disabled | |
Battery Type / Life | 1.5V AAA (3) / approximately 3500 hours of continuous use | |
Environment | -20 to +50°C (-4 to 122°F); RH max 100% (Storage Temperature: -40 to 70°C (-40 to 158°F)) | |
IP Rating | IP65 | |
Dimensions | 140 x 57 x 28 mm | |
Weight | 178 g | |
Ordering Information | Meter is supplied complete with: temperature probe, batteries (3), quick reference guide, and instruction manual. | |
Warranty | 2 year (limited) |