HI-770-25 Reagents for HI-770 Silica HR Checker HC 25 tests

HANNA HI-770-25 Silica HR Checker HC reagents for 25 tests (Silica HR)

Art.nr. HI-770-25

The HI-770-25 are the replacement reagents for the HI-770 Silica High Range Checker® HC. These high-quality reagents are clearly marked with the lot number and expiry date on each packet for traceability.

25 tests

Beskrivning Specifikation Skriv ut

Kvantitet

Pris

739 kr Exl. moms

924 kr (inkl. moms)

Beskrivning Specifikation

These high-quality reagents are clearly marked with the lot number and expiry date on each packet for traceability.

The HI-770-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Silica High Range Checker® HC. These reagents follow the Standard Method 4500-SiO₂C in which the reaction between silica and reagents causes a yellow tint in the sample. By simply adding the packet of HI-770-25 reagent to the sample, the reaction will take place and the HI-770 will determine the concentration from the colour that is produced. The results will be displayed in ppm of silica. These reagents are designed to be used with samples that have an expected range of 0 to 200 ppm silica.

Tip for an accurate measurement

It is important that the sample does not contain any debris.

Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.

Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.

Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.

After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.